Sunday, 10 March 2013

TAST stitches #56 and #57

Two TAST stitches, that is what Sharon of Pintangle gave us for this week:

#56 Sailors Stitch
which is a combination of Buttonhole stitch and Chain stitch

# 57 Sailors Edge Stitch
which is a Buttonhole stitch anchored with a Chain stitch.

You can see them (#56 in rose and #57 in brown) on my sampler, underneath the garland of Buttonholed Herringbone:



















I also made some scribbled lines:
Can you recognise the design?

















I had my design tools out and just traced the outline of  my French curve ruler...

Thursday, 7 March 2013

More on Twists

On the post for TAST stitch #55 Buttonholed Herringbone stitch, I discussed ways to control the twist in threads while stitching.

Since then there has been a lot of talk about this. I was reading the blog of Lins Arty Blobs and a comment made by Shirley, who points out that there is a way of twisting the Buttonholed Herringbone stitch on purpose. Shirley is quite right. In the excellent book A-Z of Embroidery there is a good illustration of how to do this. I thought I would show it here with my own pictures:

Work half the bar with Buttonhole stitches, keeping the thread pulled downwards, towards you.

Then change the direction of the thread and pull it upwards, away from you.

Continue to add Buttonhole stitches until you have filled the bar, pulling the thread upwards.

You have a beautiful twist made on purpose.



...............
However, for beautiful Buttonhole garlands and any other stitch that has a tendency to twist, this is how I  roll the needle between my fingers while stitching:








The index finger is pulled to the right...


so the needle moves in a clockwise direction.

This is the movement for an S-twisted thread (most threads I would say). For threads with a Z-twist, roll the needle in the opposit direction, anti-clockwise.

(As you can see I often use these rubber tips to get a good grip of the needle, especially when I quilt or stitch 'tough' fabric. Not necessary for this photo shoot, but to lazy to take them off!!)

Happy rolling, happy twisting, happy stitching!

WIPW - Turning the last corner

I am a day late... but here is my Work In Progress Wednesday report on my Bias Tape Quilt.

I have turned the last corner and have just one more side of the quilt's edge, approximately 120 cm, left to quilt.















For more information on WIPW and what other progress has been made, click here read the post, and look at the comments.

Saturday, 2 March 2013

Lagging behind TAST


I am lagging behind! Here, finally,  are the last three TAST stitches.
Herringbone Square #53, Laced Herringbone Square #54 and Buttonholed Herringbone #55





















The most difficult part with the Buttonholed Herringbone was to keep the thread free from twists. If there is too much of a twist on the thread the garland is not hanging neatly but curls in an unruly way. You can see that in the light green section of the upper row of Buttonholed Herringbone stitches.
There are two ways in which you can avoid this:

  • Let the thread dangle (with the needle as a weight)  from time to time and untwist itself.
  • Learn to roll the needle between the thumb and index finger while stitching. For S-twisted thread like the perle I have used, roll the needle clockwise.
Here you can read what Mary Cobert writes about S- and Z-twisted thread and how to sew with them.